Sunday, 3 July 2011

Gate is Finished

I don't think there was enough work in mounting the gate to warrant video, so I'll just write the main points here.
The top hinge had to be raised by about 4 inches to line up with the crossledge on the gate. This is just mounted by four screws in to a mahogany stile.

I had to drill a one and a quarter inch hole through the gate and brace to mount the lock. Originally I was unsure whether a lock designed for indoor use would stand the test of time outdoors, but the lock is probably in it's 10 or 11th year now and with just a couiple of squirts of WD40 now and again it is working fine.

On top of the door I have mounted a strip of 2x1 as a rain guard for water running on to the end grain. The wood is rebated on the bottom about three eights of an inch so it overlaps on each side.

I have also fitted a small hook and hasp latch at the top of the door as extra security if the lock is on latch. This is because we have two dogs and the kids are always leaving the gate open.

Prior to mounting the gate I left it soaking at each end overnight in Cuprinol 5 Star wood preserve. This soaked up inside the door and hopefully will provide years of protection. The rest of the gate has had a liberal brushing of the same.

Next stage is to colour the gate with a mid brown stain called fencelife. This will have to be repeated each year as the stain faids in sunlight.

I mentioned in my last video that I used a homemade door stand for planing and working on the gate. In my next post I will show some photos and instruction on how to make this handy tool.

Saturday, 18 June 2011

Ledge and Braced Garden Gate

Following my post earlier this week, here is the video showing how to make a simple ledge and braced garden gate. It's quite a long video but it covers all the relevent parts.
In a few days time I will be hanging the gate so I'll put that video up as well.
If you have any questions, drop me a line and I will help where I can.

Friday, 17 June 2011

Workmate Mountain !

Following on from my earlier B&D Workmate post: Iv'e just come across this great site! Rupert Blanchard's 'Styling and Salvage'

Rupert searches the boot sales and auction houses of the South East to find second hand furniture, storage items and general materials that he can 'hack' and turn in to really useful pieces of furniture. He uses old doors, delapidated cabinets and drawers to create some briliant results. Check out his site by clicking the image above.
What really caught my eye was his collection of B&D Workmates. He collects these second hand benches and currently has a pile of 13, nainly 625's but a couple of very early silver framed models as well.

Check out some of the recycling Rupert has done especially his fashion store refits. His work has a distinct style ...... well worth a look.

Saturday, 11 June 2011

New Garden Gate Urgently Required

Follow me to see how I go on remaking the garden gate. Wet rot has set in and it really is beyond repair.

We have had it for about 12yrs now but its starting to look way past its best.
I'm going to be making a new one and upload the photos and the video on YouTube.

Thanks for looking in.

Black & Decker Workmate refit

First made in the early seventies, the Black & Decker workmate now has worldwide sales topping 35 million.
 Invented by Ron Hickman, the workmate was rejected by many companies as being not commercial enough. It was famously rejected by Stanley tools as 'Sales possibly being in the dozens'. Ron had that rejection letter framed and mounted in his office.
The workmate is superb, well, I say the workmate, I mean the original aluminium framed WM625 workmates, that were manufactured in Ireland in the 70's. They are robust, adjustable, great looking benches, something I feel the later models lack.
Originally in powder blue these workbenches sold in their millions all over the world and made Ron a multi millionaire. I own two 625's an early alluminium model and a more recent steel framed one. I use them all the time, they really are a versatile tool and I would reccommend every DIYer to get one (or two)

An early WM625 (right) and the latter all steel version.

I bought the latter at a car boot sale for a fiver. The wooden bench tops were shot so i replaced them with solid oak jaws.
One of the damaged jaws.

The solid american light oak jaw replacement.

Oak WM625 bench top

Having a pair of workmates allows you to work really long pieces of timber and also they're great as a portable working platform. Clamp a couple of planks across them and you can do indoor decorating, easily make repairs to garage gutters, tall fences and hedges etc.

HotPod update .....

Late last year I was fortunate enough to be invited down to St Ives in Cornwall by Dan Harding, the inventor and manufacturer of the fantastic HotPod stove. I had contacted him through a link on YouTube and he said if I should find myself in his neck of the woods, I should pop in. I didn't need asking twice and when myself and my wife planned a week away at Sennen Cove near Lands End, Dan's workshop was on our list of places to visit!

We took our 'NotPod' along to show him and he gave us some very useful tips. (Mine is the smaller one in the photo)
Dan has his own smithy/blacksmiths shop in Cornwall where his hand built stoves are made and it was great to see him at work. Dan produces the hand made stoves to order (now in a range of enamel finishes) and also produces a cast iron version that is just as good looking and efficient but easier on the wallet.
If you fancy a HotPod you can contact Dan on    Tel: +44(0)1736 797 285