Thursday, 22 April 2010

Wood burning stove made from a gas cylinder

One or two people have asked if I would include the wood burning stove on the blog .... so here is the youtube video and a few photos. A couple of other videos can be found at


http://www.youtube.com/watch?v=Sf-b8oZnrmw

http://www.youtube.com/watch?v=IkW7k-nXd8Q









7 comments:

  1. Whay didn't you posted the entire process and the burn test? What's the material you used? (A gas bottle i guess). It's really intresting. Thanks.

    ReplyDelete
  2. grate job .its now 2011 .let see it in action from start to finish

    ReplyDelete
  3. love the design, its really beautiful! Felicitaciones! saludos, Noel

    ReplyDelete
  4. Wood burning stoves started out as a way to heat a home more effectively than with open fireplaces, which had traditionally been used. The first models were placed against the opening of the fireplace so that the fumes could escape through the chimney.

    ReplyDelete
  5. Yes but you Will need an insert that Will go inside of your existing chimney it comes in a kit and is quite costly from.Hope this helps.Thanks a lot to shear this.Good Luck

    http://www.pgfireplaces.co.uk/

    ReplyDelete
  6. did you place a buffer inside the stove as you said? can you send me an answer please?
    grimaanton122@gmail.com

    ReplyDelete
  7. Does anybody have any simple rules on what height a flue would need to be if I made and put one of these in my Shed/Garage.
    Don't want to hack the neighbours off to much.

    ReplyDelete