The Kreg K3 master system I bought recently in the USA

On a recent holiday in the USA I bought the Kreg Jig. This is a superb tool that allows woodworkers to quickly and easily create strong and accurate joints without the need for dowells, biscuits, glue or clamps.
It really speeds up the build process and after the initial purchase (about £100 plus screws) will start saving you time and money.
I'll be posting some pictures soon of a few items that I've made using the jig. Check out the video to see how I modified the jig to suit my bench.

Bird Table in White Gloss Finish

This is my latest project just finished. Its my dads birthday in a couple of months and he wanted another bird table as his last one rotted away.

This is made from PreVac treated redwood with a gauranteed non rot of 10yrs. It's made mainly from 2X2 and 4X1 with the feeding table made from Ply. The two cross pieces for the feet are 24" accross with 45 deg angle supports on all four sides. Each of the feet has two or one 4X4" pads.

The roof is made from two 500 X 250mm slates which were very tricky to cut, in the end I used a 'dremel' with a cutting disc to get through them. They sit on two 30deg angle pieces cut from 4X1 and lightly screwed in with Black Japaned screws.

The central ridge piece on the roof lifts out to allow nuts to be put in to the mesh food container. The whole table is fastened by four M6 coach bolts and wing nuts to a plywood top on the stand, which allows for easy removal.

Any Ideas For Some Corks??

I bought these wine corks, about 200, off Ebay a few months ago with the intention of making a notice board out of them but I've since gone off the idea. Has anyone seen a project that has used a lot of corks or any ideas for what I could use them for? I've tried cutting them and they are a nightmare ... they start to crumble and flake so if I could use them whole rather than chopped, that would be better.

The chest is now complete.

It took a while to get the right colour with the water based stain but I think I got it in the end. Two coats of stain and two coats of 'Mid Brown' furniture wax. A couple of people have mentioned that I must have had some sort of woodworking training to produce this sort of work but I can assure you that this is completely within the grasp of most hobbyists. If you can use basic hand tools and have a router you can make this box. Believe me, I am not a skilled carpenter.I reckon in total the box took approx 35hours and cost in the region of £40 ($60).

Norm's three drawer chest (With Secret Drawer)

This is my latest project. Its a softwood 3 drawer chest designed by Norm Abram from the New Yankee Workshop. He originally aired it in his season 12 episode 12 show. His version is made from cherry wood however that would be far too expensive so I'm using some softwood boards that I bought at IKEA for about £4 ($6) each.
It incorporates a box top and a secret drawer which was quite challenging for an amateur like me. The original can be seen at this link. I've just ordered some water based pine stain from a company called fiddes, I've used it before and it gives a superb natural English country pine finish. The octaganal door handles were about £1.50 each from a discounted range at a local ironmongery store called Woodfit. If you have any questions or would like to know any of the sizes, just subscribe to the blog and drop me a line.

Wood burning stove made from a gas cylinder

One or two people have asked if I would include the wood burning stove on the blog .... so here is the youtube video and a few photos. A couple of other videos can be found at


http://www.youtube.com/watch?v=Sf-b8oZnrmw

http://www.youtube.com/watch?v=IkW7k-nXd8Q

Found this bargain !!

Found this bargain in a local DIY store yesterday ...... reduced from £23 to £19 ($35 to $29). Its made by Arrow .... model No. ET100K and is capable of driving 1" nails in to hardwoods, no problem! It comes in a blown plastic carry case with four packs of nails (5/8" - 3/4" and 1"). Iv'e always wanted a small nail driver but because of limited space a pneumatic gun with compressor is just not an option.
The project I'm working on in the background of the photos is a jewellery case designed and made by Norm Abram on the NYWS. Click the link and follow through on the site to some of the photos of cases made by other woodworkers. I did'nt buy the plans I just guessed the sizes.