I don't think there was enough work in mounting the gate to warrant video, so I'll just write the main points here.
The top hinge had to be raised by about 4 inches to line up with the crossledge on the gate. This is just mounted by four screws in to a mahogany stile.
I had to drill a one and a quarter inch hole through the gate and brace to mount the lock. Originally I was unsure whether a lock designed for indoor use would stand the test of time outdoors, but the lock is probably in it's 10 or 11th year now and with just a couiple of squirts of WD40 now and again it is working fine.
On top of the door I have mounted a strip of 2x1 as a rain guard for water running on to the end grain. The wood is rebated on the bottom about three eights of an inch so it overlaps on each side.
I have also fitted a small hook and hasp latch at the top of the door as extra security if the lock is on latch. This is because we have two dogs and the kids are always leaving the gate open.
Prior to mounting the gate I left it soaking at each end overnight in Cuprinol 5 Star wood preserve. This soaked up inside the door and hopefully will provide years of protection. The rest of the gate has had a liberal brushing of the same.
Next stage is to colour the gate with a mid brown stain called fencelife. This will have to be repeated each year as the stain faids in sunlight.
I mentioned in my last video that I used a homemade door stand for planing and working on the gate. In my next post I will show some photos and instruction on how to make this handy tool.
