Iphone camera video stabiliser. Diy project. 2013

This project grew out of my dissatisfaction with the results I was getting from videoing my other projects. I use an iPhone to film and I found that unless you have it mounted on a tripod the results are in the main unwatchable, and of course if you use a tripod then your movement is very restricted. I had seen steady cams online and on ebay but most were bulky and nearly all were expensive. I decided to make one that was small, easy to set up and cheap to make.

So was born the RetroSteady. It's handle is made from bakelite, all the fittings and gimble are stainless steel and the body is made from anodised aluminium. The iphone holder is a standard tripod mount available off ebay for a couple of pounds.

 I have a main site where I hope to sell them eventually .... www.retrosteady.com. I called them the retrosteady because I think the design and black and silver colouring looks very similar to the old film cameras of the 50's and 60's.

Check out the video on this page or search RetroSteady on YouTube for a look at how the stabilizer performs.

The screw knobs on the stabiliser as seen in these photos were all I could get hold of at first but since then I have found a company that supplies very neat thumb screws that will replace them and look less bulky.
 All in all the materials cost me about £20 ..... $30. I created a wooden form to bend the shape of the main support arm and since then have made about twenty of them.

I am currently selling this item on eBay for £39.00 in the uk. You can check it out here ....

RetroSteady on eBay     Just £39 !

Alcove cupboards and PC desk project.

This is an alcove refit I carried out in February. All in all it took about 5 days including the painting. Unfortunately I lost some of the film footage so the middle section is a bit bare. If you have any questions don't hesitate to ask. Thanks for looking.

Jewellery Box

Hi again. Here is a short video showing a jewellery box I made a couple of years ago. The original design was by Steve Ramsey - the producer of 'Woodworking for Mere Mortals' website and YouTube channel.
I have a link to Steve's page here -------------- >
If you would like to make one of these I suggest you have a look at Steve's YouTube page where he posted a very comprehensive video of him making it.

The box is made from Ash, Walnut and I think boxwood.

Gate is Finished

I don't think there was enough work in mounting the gate to warrant video, so I'll just write the main points here.
The top hinge had to be raised by about 4 inches to line up with the crossledge on the gate. This is just mounted by four screws in to a mahogany stile.

I had to drill a one and a quarter inch hole through the gate and brace to mount the lock. Originally I was unsure whether a lock designed for indoor use would stand the test of time outdoors, but the lock is probably in it's 10 or 11th year now and with just a couiple of squirts of WD40 now and again it is working fine.

On top of the door I have mounted a strip of 2x1 as a rain guard for water running on to the end grain. The wood is rebated on the bottom about three eights of an inch so it overlaps on each side.

I have also fitted a small hook and hasp latch at the top of the door as extra security if the lock is on latch. This is because we have two dogs and the kids are always leaving the gate open.

Prior to mounting the gate I left it soaking at each end overnight in Cuprinol 5 Star wood preserve. This soaked up inside the door and hopefully will provide years of protection. The rest of the gate has had a liberal brushing of the same.

Next stage is to colour the gate with a mid brown stain called fencelife. This will have to be repeated each year as the stain faids in sunlight.


I mentioned in my last video that I used a homemade door stand for planing and working on the gate. In my next post I will show some photos and instruction on how to make this handy tool.

Ledge and Braced Garden Gate

Following my post earlier this week, here is the video showing how to make a simple ledge and braced garden gate. It's quite a long video but it covers all the relevent parts.
In a few days time I will be hanging the gate so I'll put that video up as well.
If you have any questions, drop me a line and I will help where I can.

New Shed Blog

Hi.
A brief introduction to my blog.........
I've made many projects over the years in my small (8x12) shed. I hope to show you some of these on these pages and maybe inspire you to get out in to your shed and create a few yourself.
I've a few videos of the stuff I've made and I'll also post links to these on YouTube.
Most of the projects are woodwork and carpentry but as a mechanical engineer there are going to be a few welding and steel construction jobs aswell.
You really dont need a fully equiped workshop to produce some good results, like I say, my shed is only 8x12 and at times it can be tight but with planning and clever use of space it can be very productive.
The shed itself was one of my first woodwork projects and I'll cover that in a later post but inside I've made collapsable jigs and fixtures that help to make maximum use of the limited space available.
So, if you have a shed and are keen to get a few projects built, follow my blog.
Thanks for looking in. Graeme